Homeowners Guide to Home Insurance Discounts, Reduced Rates and Savings

In today's economy, many homeowners are juggling higher bills on less earnings – facing tight family budgets in the wake of rising costs, credit limits or even job loss. Yet there's no need to struggle with the cost of home insurance. Despite industry increases, homeowners may be able to reduce their insurance rates by as much as 30 percent.

Neverheless, many homeowners are not using insurance discounts to lower rates – even those who apply discounts may qualify for more savings than they're getting. And lowered rates are still possible, even in today's economy.

Consider the findings reported by independent insurance agent association, Trusted Choice, in a 2009 national survey:

"53 million household responders 'admitted they are probably not taking advantage of all homeowners insurance discounts or said that they simply did not know' about policyholder discounts they are reasonably qualify for."

The survey also found that the largest percentage of respondents, about 26%, estimated they save 6-10% on their insurance premiums by using discounts. In fact, many insurance consumers could be saving significantly more-as much as 30%, according to independent insurance agencies, which often shop on behalf of consumers and help them find discounts and compare rates.

Homeowners are usually aware of the more common discounts – such as a multiple policy discount to insure both home and auto under one carrier. But there are other discounts and savings they miss.

How savvy are you as a homeowner and insurance consumer?

Find out using this quick list to explore or measure your potential for insurance discounts. It's also the knowledge you and your insurance agent need to reduce rates for savings:

  • Dual duty – Do not overlook the most common discount available: multiple policy discounts. When the same company insures your home and car, you can probably reduce your overall insurance costs by 10 to 15 percent.
  • New home, new homeowner? The same criteria used to qualify your home for a specific mortgage is often the same that qualifies your policy for discounts.
  • Living in a gated community? Then you may be eligible for discounts. Be sure to ask about auto insurance discounts if your car is evenly 'protected' to boot.
  • Rooftop savings – Some insurance companies offer hail resistant roof discounts for Class 4 roofs – naturally these credits may vary with locale. Moreover, be sure to ask your insurer about potential discounts before putting a new roof on your house – you'll probably want to capture savings if available and a flat roof without roof warranty may disqualify you from your current coverage alike.
  • Be a new policyholder – You may find additional savings extended to new customers based on new rating models that offer a 'sign up' discount. If your insurer extends this discount, your insurance agent may be able to capture it by applying for a new policy with the same company.
  • Your track record counts – make sure you discover discounts for home insurance customers who have a claim-free track record … when was the last time you filed a home insurance claim? A 10-year history typically qualifies you for this discount; If you've never filed a claim, you may save as much as 20 percent.
  • Risk reductions – Ask your agent to identify risk reduction discounts addressing a range of interior and exterior factors: fire and smoke alarms, electrical wiring, fireplace / chimney safety, heating apparatus, burglar alarms, curb and gutter system and landscaping elements. Proximity to a fire hydrant and your community's fire department also applies.
  • Preventive maintenance and home security – Make sure your insurance agent is aware of any alarm systems or preventive measures you take to secure property and to keep your home safe. Although discount criteria varies, you may be able to get savings of 10 to 15 percent for a combined system that may include two or more measures: deadbolt locks, lockable garages and storage buildings, fire alarms, fire sprinklers, fire extinguishers, a burglar Alarm or home security system.
  • Good breeding gone bad – Like it or not, some pets have a reputation. You may adore your family pet but if Fido is a dog breed considered bite-happy or dangerous, your insurance rating may be affected or your coverage in jeopardy. Choose your pet wisely – be aware of the little issues that can turn your insurance into a big issue.
  • Score card – Expect your credit score to impact your home insurances rates. If married, you may be able to reduce your rate by listing the top scorer as the first named on the insurer's application. Plus, if you've had a less-than-score score and recently improved your numbers, let your insurance agent know. You may be able to get a policy adjustment: a lower insurance rate is still possible without the need to write a new policy.
  • Raise the limit – consider the difference a deductible makes. You can probably lower your rate by raising your deductible – $ 2,500 is the standard deductible and you can expect a lower rate if you raise it to $ 5,000.
  • Agent vs. Agent and the extended marketplace – Is your insurance agent an independent who can tap a broad product range? Or an agent affiliated with a name-brand company? Know the difference. Independent agents can shop around – explore options across the marketplace. Brand agents do not usually have the same agility – they're usually limited to the company practice or limited to brand products. Loyalty counts. Still, if you're committed to one company brand you may be just as limited as the insurance agent who is equally missing rate rates, discounts and savings offered by the brand's competition.
  • 'Home pride' and stewardship are vital – Even many insurance agents do not understand the role that stewardship plays in harnessing the broadest range of discounts possible. Why? The better care you take of your home, the more attractive you'll look to insurance carriers. And the best way to harness discounts is to identify as many discounts as possible – it stands to reason that more companies mean more potential for discounts.

So, you'll want to make sure your home qualifies for coverage from every company that offers coverage in your locale since increased competition generally decreases rates and opens your access to discounts.

In a nutshell, homeowners applying the discounts above will soon realize the many ways they can save on their home insurance – even when times are tough.

Get started on discounts for savings ….

  • Shop around to compare insurance company providers and rates – what companies provide home insurance in your community?
  • Get guidance on the details – an independent insurance agent is not tied to one brand, so these agents can help you see the whole marketplace and get the apples-to-apples lens you need to compare products, coverage and rates.
  • Identify discounts – make sure you identify the common discounts most homeowners hit, along with other discounts that frequently miss.
  • Do the 'homework' – the work at home that demonstrates stewardship makes you eligible to select from the broadest insurance product range possible.
  • Optimize selection, and then maximize discounts to benefit from reduced raters and savings.
Posted in general | Tagged , , | Comments Off on Homeowners Guide to Home Insurance Discounts, Reduced Rates and Savings

Forehand Vs Backhand MIG Welding Techniques

Forehand and backhand welding are the most basic of all welding techniques. They are simple, have their purpose and provide a specific type of weld when used properly. In this article you will learn why these techniques are used and most importantly why.

Forehand Technique

Forehand is a technique where the welder pushes the puddle and keeps the arc slightly ahead of the puddle. Forehand welding is done with the MIG gun pointed in the direction of travel. For example, if the welder will be welding from right to left, then the MIG gun will point toward the left at all times. The angle that the MIG gun is pointed toward the direction travel can vary. The angle of the MIG gun can be anywhere between 5 degrees to as much as 35 degrees toward the direction of travel. When traveling forehand the welder must focus on keeping the arc slightly ahead of the puddle.

Backhand Technique

The backhand technique is the exact opposite of the forehand welding technique. In the case of back hand welding the welder keeps the MIG gun pointed toward the weld while traveling away from it. For example if the welder is welding from left to right then the MIG gun will be pointed toward the left. The angle of the MIG gun can vary between 5 degrees to 35 degrees toward the weld.

Understand the Reasons for these Welding Techniques

These MIG welding techniques do serve a very important purpose. What they do is control the weld shape and the penetration pattern.

Forehand welding is the most commonly used technique for MIG welding. What the forehand method does is produce a shallow but wide penetrating weld that is flat in appearance. This is the type of weld and penetration is used for most weld joints where overheating is not an issue.

Backhand welding is the least used welding technique when it comes to MIG. This technique produces the deep and narrow type of penetration that is best suited for thinner metals. The advantage of backhand welding is that the arc is focused onto the filler metal and that means extra material to prevent burn through. When welding thinner metals you always run the risk of burning a hole through the weld joint. With the backhand method the extra filler metal at the arc helps prevent this and at the same time can keep warp age to a minimum.

Posted in general | Tagged , , | Comments Off on Forehand Vs Backhand MIG Welding Techniques

Real Estate Agents – Strengths and Weaknesses in Listing Commercial Property Today

In this commercial property market there are some real pressures and challenges that confront a lot of property owners when they want to sell or lease their property. They need the help of top agents that really understand the local area, to help in moving the property.

Contrary to popular belief, it is in markets like this that good agents can make a lot of commission. It all comes down to the way in which they package their services and help their clients.

In simple terms, top agents and experienced agents can do very well today providing them work the local area and their database. A good database will always get you through any market conditions and frustrations. In saying, that I am a big believer that a salesperson's database should not be delegated to the office administrative staff to control.

Every salesperson should take ownership of their database; In this way they will get good activities from it. In this market you need leads that you can do something with. When a database is passed over to the administrative staff to control, the inevitable result is inaccurate and old data. The database soon becomes redundant. The salesperson does not keep it up to date.

Become Change Agents

So we are the 'agents of change' when it comes to helping our property clients an owners get results in this market. We should know how to attract the right people to every property listing that we take on. Exclusive listings are more important in today than ever before. Some top agents will not take on 'open listings' for the very reason that they are a waste of time and effort.

When you know the drawbacks of the industry and the listings today, you can offer the clients that you serve some solid solutions. So what are the drawbacks? Here is a list of some of the larger ones:

  1. The time that it takes to sell or lease a property can be longer today. Every client has to be conditioned for the best price or rent so the time on market is not lengthened. The first few weeks of every marketing effort are the most important. Position the property correctly to get the best inquiry in this time.
  2. High prices and high rents will achieve nothing. The price or rent for the property should be optimized for inquiry. You have to do more with less when it comes to marketing and inspecting of properties.
  3. A larger number of competitive properties can frustrate your marketing efforts and time on market. Check out these properties before you do anything with your listing.
  4. Buyers and tenants are slower to inquire, inspect the property, and then make a decision. Your skills with each stage of the listing should be optimized. Hone your skills accordingly.
  5. Limited finance can put some 'brakes' on the larger deals. Find out where your prospects can get finance from and what the criteria of approval may be.

Whilst these may be drawbacks in the market, they are also opportunities for agents that can get focused and organized. Every problem is an opportunity in disguise.

Are you a solution provider in this commercial real estate market? Top agents are just that. You can be too.

Posted in general | Tagged , , | Comments Off on Real Estate Agents – Strengths and Weaknesses in Listing Commercial Property Today